| Customization: | Available |
|---|---|
| Type: | Slot Type Photoelectric Sensor |
| Output Signal Type: | NPN/PNP |
|
Still deciding? Get samples of US$ 5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
C3-SX67 series slot photoelectric switch is through the non-contact way, the use of the detected object on the light beam blocking, by synchronizing the circuit into a switching output of a sensor, so as to be able to detect a minimum of 0.8 * 2mm, the thickness is not greater than the width of the slot 5mm opaque objects. Slot photoelectric switch is mainly used in automatic detection, automatic control, automatic counting and other automation equipment and equipment.
1. The product has a high waterproof grade, up to IP67, and can be used in places with harsh environments.
2. There are a variety of installation methods to meet the different use of space.
3. High speed response frequency 1kHz.
4. There are 0N when shading / 0N when entering the light (switchable) action mode.
5. Wide voltage range 5-24VDC.
6. The red indicator light is highly visible.
7. The product conforms to the national standard GB/T14048.10.
| DC | NPN | NO/NC | C3-SX670-WR |
| C3-SX670A-WR | |||
| PNP | NO/NC | C3-SX670P-WR | |
| C3-SX670R-WR | |||
| Working power | DC5~24V | ||
| Operating Current | Load current ≤ 100mA; Static current: ≤ 25mA | ||
| Residual Voltage | ≤ 1V (at 50mA load current) | ||
| Protection circuit | Polarity, overload protection | ||
| Indicator | Red action indicator | ||
| Temperature range | Operating: -25 to +70°C (no icing or condensation); Storage: -30 to +80°C (no icing or condensation) | ||
| Protection level | IP67 | ||
){kind=link}