| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Combination |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. HHD7-F forward and reverse automatic controller (hereinafter referred to as controller) is suitable for use as a delay element in control circuits with AC 50Hz, working voltage 380V and below or DC working voltage 24V.
2. The controller has the advantages of high delay accuracy, wide delay range, low power consumption, etc., and its dimensions conform to DIN standards (48mm×48mm), and is widely used in various automatic control circuits of motors.
3. This series of controllers conforms to the relevant requirements of GB/T 14048.4.
| Specification | HHD7-F |
| Working power supply | DC24V;AC24V,AC220V,AC380V 50Hz |
| Delay range | Forward/reverse: 1s~99m99s, 0.1s~999.9s, 1s~9999s; Stop: 0.1s~999.9s |
| Contact form | Two normally open contacts with control reset terminal |
| Contact capacity | 3A AC250V (resistive) |
| Installation method | Panel type, device type, 35mm rail type |
| Repeat error | ≤ 1% |
| Working mode | 1. Stop → forward → stop → reverse → ... 2. Forward → stop → reverse → ... |
| Action times | Unlimited, 1~9999 times can be set |
){kind=link}