CHB38H Half Empty Shaft Rotary Encoder for Automation Control Fields

• Customization: Available
• Type: Rotary Encoder
• Working Principle: Incremental
• Model NO.: CHB38H
• Readout Mode: Non-Contact
• Operating System: Magnetoelectric Type
• Signal Output: Open Collector Output
• Axle Sleeve Type: Solid Shaft
• Package: SMD
• Installation Form: Axle Sleeve Type
• Brand: C-Lin
• Axonia: Servo Installation Type
• Straight Hole: Ф8mm
• Working Power: DC5-24V
• Transport Package: Canton Box
• Specification: Dia. 38mm
• Trademark: C-lin
• Origin: China
• HS Code: 8543709990
• Production Capacity: 5000PCS/Month

Product Description

Product Description
Incremental model encoder is a speed and displacement sensor integrating optical, mechanical, electrical technologies, when the encoder drives the optical grating disk to rotate, the length, angle, speed can be measured accurately by converting the grating lines number into pulses numbers.
Model Meanings: 




Specification
CHB38H series

Model	CHB38H-N/E/F/L-(100,200,360,400,600,800,1000,1024,2000,2500)
Main size	External diameter:φ38mm; Shaft inner diameter:φ8mm
Working power	DC5V-24V
Output mode	N: Open-collector  output (NPN)
	E: Voltage output
	F: Complementary output
	L: Drive output
Pulse output	100,200,360,400,600,800,1000,1024,2000,2500
Output phase	A B Z or A B Z -A -B -Z
Termination mode	G:Side entry cable
Application	Stone machinery, robots and other automation fields

Product packing

Our factory 





Precaution
1). This product is consists of high-precision parts, be sure to handle with utmost care, do not drop.
2). When mounting this product, if decentering tolerance or declination tolerance is too big, may
 result in reduce its working life.
3). Make sure that the product is free from impact, vibration, corrosion, high magnetic field, high
 temperature, high humidity and acid-alkaline environment.
4). Unnecessary pulses are output when turn ON or OFF, be sure to turn ON the peripheral devices
 connect to the encoder 0.5S after turning ON the encoder, and turn OFF the peripheral devices
 0.5S before turning OFF the encoder.
5). After wiring the cable with the encoder securely, do not pull the cable with 29.4N or more.
6). If it is near to high voltage line or power supply cable, please use cable tube to cover the wires.
7). When wiring the cable, be sure no short connect between each cable, do not make mistakes in the
 wiring, otherwise the encoder may be damaged.
 It is suggest to make proper insulation for the cable which is not required for connection
9. Precaution
8). Shielded cable should be proper grounded.
9). Do not disassembly the product
Please contact us for more product information 
 

Our Experimental Center Testing Device

Our Automatic Production Line