Chb50s-F-600 Incremental Rotary Encoder

• Type: Rotary Encoder
• Working Principle: Incremental
• Readout Mode: Contact
• Operating System: Photoelectric Type
• Signal Output: Voltage Output
• Axle Sleeve Type: Large Diameter Type
• Package: SMD
• Installation Form: Axle Sleeve Type
• Brand: C-Lin
• Axonia: Servo Installation Type
• Transport Package: Standard Export Packing
• Trademark: C-lin
• Origin: China
• HS Code: 8543709990
• Production Capacity: 5000PCS/Month

Product Description

Product Description


Rotary Encoder Series
Rotary encoders are high tech sensors with a combination of optical, mechanical, electrical 
precision technology to measure displacement and angle. 
 

Main Features: 
small size, various types, complete function, high frequency response, high resolution, low 
power consumption, stable performance, reliable and long life.


Specification

CHB50S series
Model	CHB50S-N/E/F/L-(100,200,300,360,400,500,600,800,1000,1024,2000,2500)
Main size	External diameter:φ50mm; Shaft diameter:φ8mm
Working power	DC5V-24V
Output mode	N: Open-collector  output (NPN)
	E: Voltage output
	F: Complementary output
	L: Drive output
Pulse output	100,200,360,400,500,600,800,1000,1024,2000,2500
Output phase	A B Z or A B Z -A -B -Z
Termination mode	G:Side entry cable
Application	Computer Control Crosscutting Machine and other automation fields .

Working principle



Outline size





Precaution
1). This product is consists of high-precision parts, be sure to handle with utmost care, do not drop.
2). When mounting this product, if decentering tolerance or declination tolerance is too big, may
 result in reduce its working life.
3). Make sure that the product is free from impact, vibration, corrosion, high magnetic field, high
 temperature, high humidity and acid-alkaline environment.
4). Unnecessary pulses are output when turn ON or OFF, be sure to turn ON the peripheral devices
 connect to the encoder 0.5S after turning ON the encoder, and turn OFF the peripheral devices
 0.5S before turning OFF the encoder.
5). After wiring the cable with the encoder securely, do not pull the cable with 29.4N or more.
6). If it is near to high voltage line or power supply cable, please use cable tube to cover the wires.
7). When wiring the cable, be sure no short connect between each cable, do not make mistakes in the
 wiring, otherwise the encoder may be damaged.
 It is suggest to make proper insulation for the cable which is not required for connection
9. Precaution
8). Shielded cable should be proper grounded.
9). Do not disassembly the product